Additional Drive Installation Procedure - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 5 Component Expansion/Function Enhancement
5.1 Installing Additional Drives
■
About Shock
5.1.3

Additional Drive Installation Procedure

This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Do Not
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
•
Do
• If components are installed in a way other as described in this section, damage
and/or device failure or electrical shock may occur.
Do Not
• Do not install drives that are for use in other devices.
69
Copyright 2017 FUJITSU LIMITED
P3AM-7662-09ENZ0