Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 92

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
(8)
Attach the "DE_No." labels to the positions shown below.
Attach the labels in the same installation order as the drive enclosures (cable between enclo-
sures connection order).
Right front side of the high-density drive enclosure
(9)
Attach the front cover.
Front cover
5
Check the connection destination of the mini SAS HD cables between enclosures.
The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the added
•
drive enclosure.
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
The DE_No. labels are supplied with the ETERNUS DX.
Copyright 2017 FUJITSU LIMITED
Upper right rear side of the high-density drive enclosure
DE_No. label
92
P3AM-7662-09ENZ0