Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 73

Chapter 5 Component Expansion/Function Enhancement
5.1 Installing Additional Drives
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives
have been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
■
For Drives for High-density Drive Enclosures
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Do
• Hold the drive with both hands to protect against jarring.
Step 3 and Step
73
Copyright 2017 FUJITSU LIMITED
Lock lever
4.
P3AM-7662-09ENZ0