Figure 1.24 Sas Interface (Installed In A Controller); Figure 1.25 Ethernet 1Gbit/S Interface (Installed In A Controller) - Fujitsu ETERNUS DX100 S4 Basic Operation Manual

Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
●
SAS 6Gbit/s
The ports on the host interface are used to connect SAS cables. This port uses a miniSAS (SFF-8088) connec-
tor.

Figure 1.24 SAS Interface (Installed in a Controller)

1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
●
Ethernet 1Gbit/s
The ports on the host interface are used to connect LAN cables. This port uses an RJ-45 connector.

Figure 1.25 Ethernet 1Gbit/s Interface (Installed in a Controller)

2
1
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface port (CA#0, Port#2)
5. Host interface port (CA#0, Port#3)
6. Host interface (CA#1)
7. Host interface port (CA#1, Port#0)
8. Host interface port (CA#1, Port#1)
9. Host interface port (CA#1, Port#2)
10. Host interface port (CA#1, Port#3)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
3
2
3 4 5
Copyright 2017 FUJITSU LIMITED
6
5
4
7 8 9 10
6
32
P3AM-7662-09ENZ0