Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 94

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
(ii)
(2)
Connect the power cord on the power socket side.
Connect the other end of the power cord plug to a power socket or an inlet on the power distribu-
tion unit.
8
To add 2.5"/3.5" type drive enclosures, turn the PSU switches of the power supply units (PSU#0 and
PSU#1) in the drive enclosure to the ON position (marked "|").
9
In the [Add Drive Enclosure] screen, click the [Next>>] button.
Configuration of IOM#0 in the drive enclosure that is to be added and the power supply units in the
system is performed.
When the configuration process is complete, the [Disable IOM#1] screen appears.
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Fasten the plug of the power cord with the release tie.
Wrap the release tie around the power cord and fasten the release tie from either side. Make
sure that the release tie is not loose.
Copyright 2017 FUJITSU LIMITED
94
P3AM-7662-09ENZ0