Chapter 5
Component Expansion/Function Enhancement
5.1
Installing Additional Drives
■
For 2.5" Drives
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Catch
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Dummy drive unit
Tab
Lock lever
Copyright 2017 FUJITSU LIMITED
70
P3AM-7662-09ENZ0