Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 99

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
To add high-density drive enclosures, fasten the high-density drive enclosure cables (the mini SAS
HD cable between enclosures and the power cord) to the flap brackets and the cable management
arm on the rear of the device with the clamp belts.
Cable management arm
16
Click the [Next >>] button.
A screen that indicates the drive enclosure has been added appears.
17
Click the [Done] button.
The [Add Drive Enclosure] screen closes and the screen display returns to the [Drive Enclosure] screen.
18
In the [Storage] screen of [Component], check that the added drive enclosure is displayed.
19
To install more additional drive enclosures, repeat
20
Install the drives.
For details on drive installation, refer to
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
Clamp belts
Flap bracket
Clamp belts
"5.1.3 Additional Drive Installation Procedure" (page
99
Copyright 2017 FUJITSU LIMITED
Step 1 to Step 18.
69).
P3AM-7662-09ENZ0