Cf Card Status Led - HP FlexFabric 12500E Installation Manual

Figure 77 LST1MRPNE1 LEDs
(1) CF card status LED (CFS)
(4) Fan status LED (FAN)
(7) MPU status LED (RUN)

CF card status LED

Table 41 CF card status LED description
LED
CFS
NOTE:
When the CF card LED is on, do not unplug the CF card. To unplug it, execute the umount command in
user view to uninstall the CF card, and then unplug the CF card when the CF card LED is off.
Network management port LEDs
Table 42 Network management port LED description
LED
LINK
ACT
(2) Switching fabric module LED (SFC)
(5) Power status LED (PWR)
(8) Network management port LED (LINK)
Status
Steady on
Flashing
Off
Status
Off
Steady on
Off
Flashing
101
(3) LPU status LED (LC)
(6) MPU status LED (ACT)
(9) Network management port LED
(ACT)
Description
The CF card is present and idle.
The CF card is present and performing read/write
operations. Do not unplug it.
The CF card is out of position or offline. You can plug in or
unplug it.
Description
No link is present.
A link is present.
No data is being transmitted or received.
Data is being transmitted and/or received.