Advertisement

Figure 60 Removing the SFP+ module
3.
Put the removed SFP+ module in an antistatic bag or its original shipping materials.
4.
Unpack the SFP+ module to be installed and make sure the clasp is closed.
5.
Remove the optical fiber, if any, from the SFP+ module before installing it.
6.
Gently insert the SFP+ module into the port until it fits in completely, as shown in
7.
Connect the optical fibers to the new SFP+ module.
Figure 61 Installing an SFP+ module

Replacing the CFP transceiver module

1.
Put on an ESD wrist strap. Make sure it has close skin contact and is correctly grounded.
2.
Remove the CFP transceiver module.
a.
Loosen the captive screws on the CFP transceiver module.
b.
Pull out the CFP transceiver module slowly along the slide rails.
3.
Put the removed CFP transceiver module in an antistatic bag or in its original shipping materials.
4.
Install the new CFP transceiver module.
a.
Unpack a new CFP transceiver module.
b.
Insert the CFP transceiver module slowly along the slide rails until it fits in completely.
c.
Fasten the captive screws on the CFP transceiver module.
80
Figure
61.

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: