Mpu Leds - HP FlexFabric 12500E Installation Manual

MPU LEDs

Table 47 MPU LED description
MPU LED
ACT (green)
RUN (green-red)
LPU LEDs
An LPU has two types of LEDs: interface LEDs and RUN LEDs.
Interface LEDs
LINK and ACT LEDs
Each interface on the following LPUs has a LINK LED and an ACT LED:
LST1XP8LEB1
•
LST1XP8LEC1
•
Table 48 Interface LED description
LED
LINK
ACT
LINK/ACT LED
Each interface on the following LPUs has a LINK/ACT LED:
LST1GP48LEB1
•
LST1GP48LEC1
•
LST1GP48LEF1
•
• LST1GT48LEB1
LST1GT48LEC1
•
LST1XP16LEB1
•
• LST1XP16LEC1
LST2XP8LEB1
•
Status
Steady on
Off
Flashing green
Flashing red
Steady on
Off
Status Description
Off No link is present.
Steady on A link is present.
Off No data is being transmitted or received.
Flashing Data is being transmitted and/or received.
Description
The MPU is in active state.
The MPU is in standby state.
The MPU is operating correctly.
The MPU is faulty.
The MPU is faulty.
The MPU is faulty or not present.
103