Download Print this page


Figure 83 Affixing a label
Figure 84
shows the affixed labels when the cable is laid vertically and horizontally.
Figure 84 Affixed labels
03 12

Affixing a label to a power cord

Stick the label to the recessed rectangular area on the identification plate. You can stick the label to either
side of the identification plate. Be sure to affix the labels on the same side of the identification plates.
A cable tie is bundled 2 cm (0.79 in) away from the connector. You can affix the label to other positions
as needed.
Figure 83
shows how to affix a label when a cable is laid horizontally.


Comments to this Manuals

Symbols: 0
Latest comments: