HP FlexFabric 12500E Installation Manual page 99

Model
LST1XP8LEB1
LST1XP8LEC1
LST1GP48LEB1
LST1GP48LEC1
LST1GP48LEF1
LST1GT48LEB1
LST1GT48LEC1
NOTE:
• HP recommends that you set the operating mode of a 12508E or 12518E to grand mode by using the
system-working-mode grand command if it uses only the FD-suffixed LPUs, FG-suffixed LPUs, or their
combination.
For more information about transceiver modules, see "Appendix C Transceiver modules."
•
OAA modules
CAUTION:
The software upgrade of OAA modules must be performed through console ports or Ethernet ports on the
OAA modules, rather than on the MPU.
Table 31 OAA module specifications
Model
LST1FW2A1
LST1FW3A1
Number
SDRAM
of ports
1 GB 8
1 GB 8
1 GB 48
1 GB 48
1 GB 48
1 GB 48
1 GB 48
Descriptions
Firewall module
Firewall module
Port type
10GBASE -R/W XFP/LC fiber
ports
10GBAS -R/W XFP/LC fiber
ports
1000BASE-X-SFP/LC fiber
ports
1000BASE-X-SFP/LC fiber
ports
1000BASE-X-SFP/LC fiber
ports
10/100/1000BASE-T-RJ45
copper ports
10/100/1000BASE-T-RJ45
copper ports
Interfaces
•
1 console port
•
2 USB ports
•
2 × 10/100/1000BASE-T copper ports
•
2 GE combo interfaces
•
1 console port
•
2 USB ports (reserved for hardware, not
supported by software)
•
2 GE combo interfaces
93
Supported modules and
cables
10-GE XFP modules
10-GE XFP modules
FE/GE SFP modules
FE/GE SFP modules
FE/GE SFP modules
RJ-45 cables
RJ-45 cables
Supported
modules and
cables
•
GE SFP
modules
•
RJ-45 cables
•
GE SFP
modules
•
RJ-45 cables