Download  Print this page

Advertisement

Installing the switch

WARNING!
To avoid bodily injury, do not touch any wire, terminal, or part marked with a high-voltage hazard sign.
Figure 8 Switch installation procedure
Install an expansion cable
management bracket (optional)
Install the switch to a rack
Install a power module
Confirming installation preparations
Before installing an HP 12500E switch, verify that:
You have read "Preparing for installation" carefully and the installation site meets all the
requirements.
Start
Remove the power frame mounting brackets
Determine the
installation method
Mount the switch on a
Ground the switch
Install a fan tray
Connect the power cord
Verify the installation
End
Install a chassis air filter
(optional)
workbench
Install a card
14

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: