Prn 50/Prn 50-M Digital Writer; Laser Printer - GE Solar 8000M/i Service Manual

PRN 50/PRN 50-M digital writer

Laser printer

2026265-075C
Equipment overview: System components
The PRN 50/PRN 50-M digital writer thermally records patient data on a
paper strip. Any parameter or trace that can be monitored on a monitor
can be graphed by the writer. Graphs initiate automatically when an
alarm is activated, or they can be initiated manually from the monitor.
NOTE
The PRN 50-M digital writer is an M-Port device. To make an
AutoPort device (such as PRN 50) M-Port compatible, use the
AutoPort to M-Port adapter, pn 2001973-001.
An optional laser printer can be connected directly to the monitor via one
of the M-Ports. The laser printer must have a serial port, and an
interface adapter is required for the cable between the laser printer and
the monitor. Refer to the instructions provided in Laser Printer Support
Kit, pn 2013421-001, for details on the interface adapter and installing a
serial card in a laser printer.
WARNINGS
SHOCK HAZARD. Laser printers are UL 60950/EN
60950 certified equipment, which may not meet the
leakage current requirements of patient care equipment.
This equipment must not be located in the patient
vicinity unless the medical system standard EN
60601-1-1 is followed.
Do not connect a laser printer to a multiple portable
socket outlet (MPSO) supplying patient care equipment.
The use of an MPSO for a system will result in an
enclosure leakage current equal to the sum of all the
individual earth leakage currents of the system if there is
an interruption of the MPSO protective earth conductor.
Solar 8000M/i patient monitor
003C
2-7