GE Solar 8000M/i Service Manual page 97

Clear Monitor Memory
Set Configuration
Serial Download Main
Serial Download Boot
View Main Code Error Logs
Tools Menu
Video Test Screens
Options Menu
2026265-075C
Troubleshooting: Service menus
If you respond with YES in this option, you will erase all patient
histories and programmed defaults in the protected memory and return
to factory installed defaults.
This menu contains options for defib sync for ECG modules (not Tram
modules), line frequency, country selection (not for text translations),
and setting language for displayed text.
WARNING
Changing the language will discharge the monitor and
erase any saved monitor defaults. The monitor defaults
will be set to the factory defaults.
This option is used when downloading software from a laptop PC.
This option is used when downloading software from a laptop PC.
Allows access to the error logs generated by the Main Code.
This password protected menu contains service diagnostic tools. Use
password "mei^".
Various color screens for testing the display.
In this menu, you can enable various software options (Hires Trends,
Cardiopulmonary Features, etc.) and change the monitor software level.
A unique password is required for each option and to change the software
level or Ethernet address. Fax a password request to GE Customer
Relationship Center at (414) 362-3250 to obtain a password. You must
provide your product serial number and Ethernet address. (The Ethernet
address displays in the Boot Code banner information.)
Solar 8000M/i patient monitor 5-5