Recommended Specifications For Non-Medical Grade Crt Displays - GE Solar 8000M/i Service Manual

Recommended specifications for non-medical grade CRT displays

2026265-075C
Appendix A – Technical specifications: Solar 8000M/i display
The following are recommended specifications:
Monitor (Display) Size: 12-inch to 19-inches typical
Input Voltage Range:
Controls:
Environmental:
Operating
Temperature:
Humidity:
Bandwidth:
Dot Pitch:
Misconvergence:
Non-linearity/Geometric Distortion:
Luminance:
CRT:
Mounts:
Solar 8000M/i patient monitor
90-254 VAC 50/60 Hz
On/Off, Brightness, Contrast
10 to 40 degrees C
10 to 95% (non-condensing)
60 MHz minimum
0.28 mm maximum
0.3 mm maximum
2% maximum
>40 foot-lamberts at screen center with 20% white screen
Anti-glare coating and transmissiveness of approximately 57%
If the monitor (display) will be mounted, it must accommodate GCX
or equivalent mounting
GCX Corporation
3875 Cypress Drive
Petaluma, CA 94954
707-773-1100
A-25