Required Specifications For Non-Medical Grade Digital Flat Panel Displays - GE Solar 8000M/i Service Manual

Required specifications for non-medical grade digital flat panel
displays
A-26
Appendix A – Technical specifications: Solar 8000M/i display
The following are required specifications:
Electrical:
Horizontal:
Vertical:
Video:
NOTE
Multiscan displays indicate the sync rate and the refresh rate as
ranges (e.g., 20 KHz to 80 KHz), rather than a single value. To meet
the required specifications, ensure that the ranges indicated on your
display include a 48.4 KHz horizontal sync rate and a 60 Hz vertical
refresh rate.
Monitor (Display) Connections:
Captive cable, or interconnect cable (processor unit to display):
Connector(s):
Emissions:
Agency Approvals:
Solar 8000M/i patient monitor
Sync Rate:
Sync Input:
Refresh Rate:
Sync Input:
TMDS Digital Video
DFP 1.0 Compliant
Resolution:
20 pin mini-D ribbon (MDR) male connector
20 pin mini-D ribbon (MDR) female connector
CISPR 22
IEC 60950-1, UL 60950-1, CAN/CSA-C22.2 No. 60950-00, CE
See "Non-medical grade displays"
48.4 KHz (*see note)
TTL negative
60 Hz (*see note)
TTL negative
1024 x 768
on page A-23.
2026265-075C