System Settings - Watch Parameters - GE AKTA avant User Manual

9.7.8

System settings - Watch parameters

The following table describes the watch parameter settings available for ÄKTA avant.
Instruction name
Watch UV parameters
Watch UV 2nd parame-
ters
Watch cond parameters
Watch cond 2nd parame-
ters
Watch pH parameters
Watch flow parameters
Watch pressure parame-
ters
Watch analog in parame-
ters
ÄKTA avant User Manual 29035184 AE
9.7.8 System settings - Watch parameters
Description
Sets the accepted signal fluctuation and Delta peak
limit of the UV signal for some of the tests in the
Watch:Watch and Watch:Hold until instructions.
Sets the accepted signal fluctuation and Delta peak
limit of the UV 2nd signal for some of the tests in the
Watch:Watch and Watch:Hold until instructions.
Sets the accepted fluctuation and Delta peak limit of
the conductivity signal for some of the tests in the
Watch:Watch and Watch:Hold until instructions.
Sets the accepted fluctuation and Delta peak limit of
the signal from the second conductivity monitor for
some of the tests in the Watch:Watch and Watch:Hold
until instructions.
Sets the value for the accepted fluctuation of the pH
signal used for the test Stable signal in the instructions
Watch:Watch and Watch:Hold until.
Sets the value for the accepted fluctuation of the flow
rate signal used for the test Stable signal in the instruc-
tions Watch:Watch and Watch:Hold until with signal
System flow.
Sets the value for the accepted fluctuation of the pres-
sure signals used for the test Stable signal in the instruc-
tions Watch:Watch and Watch:Hold until.
Sets the accepted signal fluctuation and Delta peak
limit of the analog signal for some of the tests in the
Watch:Watch and Watch:Hold until instructions.
9 Reference information
9.7 System settings
471