Replace Tubing And Connectors - GE AKTA avant User Manual

7 Maintenance
7.8 Replacement procedures

7.8.1 Replace tubing and connectors

7.8.1

Replace tubing and connectors

Maintenance interval
Replace tubing and connectors when required, for example when a tubing has clogged
or has been bent so that the flow is stopped.
Required material
The following materials are required:
•
•
•
Instruction
Follow the instruction below to replace tubing and connectors.
Step
1
2
3
336
Tubing and connectors
Tubing cutter
Fingertight wrench
Action
Make sure that no run is in progress on the instrument.
Unscrew the connectors, and disconnect the tubing.
If the tubing has labels, remove the labels to be used with the new tubing
later. Discard the tubing and connectors.
ÄKTA avant User Manual 29035184 AE