Calibration Procedures - GE AKTA avant User Manual

Hide thumbs Also See for AKTA avant:

Table of Contents

7 Maintenance

7.7 Calibration procedures

About this chapter

This section provides instructions for calibration procedures that can be performed using

the System Control module in UNICORN software.

In this section

This section contains the following subsections:

7.7.1 Calibrate the pH monitor

7.7.2 Calibrate the pressure monitors

7.7.3 Calibrate the Conductivity Monitor

7.7.4 Calibrate the UV monitors

Open the Calibration dialog box

Open the System Control module. On the System menu, click Calibrate to open the

Calibration dialog box.

ÄKTA avant User Manual 29035184 AE