Fraction Collector F9-R - GE AKTA avant User Manual

Hide thumbs Also See for AKTA avant:

Table of Contents

4 Optional instrument modules

4.9 Fraction collector F9-R

Introduction

The external Fraction collector F9-R is installed as the second fraction collector in the

ÄKTA avant system. It is used to expand the fractionation capabilities of the ÄKTA avant

or used to fractionate volatile solutions for example in reversed phase separations.

The Node ID of the external Fraction collector F9-R must be set to 1 in order to be used

in the in the ÄKTA avant system. The Node ID is set by positioning the arrow of the rotating

switch at the back of the fraction collector. See Connector panel illustration, on page 132

and Section 9.15 Check and change the Node ID of a module, on page 515.

The external fraction collector can be used for:

Fraction collector F9-R has the following function for reducing sample spill during frac-

Fixed volume fractionation

Peak fractionation

Combined fixed volume fractionation and peak fractionation

Collecting fractions in reversed phase separations using organic solvents

ÄKTA avant User Manual 29035184 AE