Create A Method And Perform A Run - GE AKTA avant User Manual

5.9

Create a method and perform a run

About this section
This section provides an overview of how to create a method in UNICORN and how to
perform manual and method runs on ÄKTA avant.
It also contains advice on things to be considered during and after a run.
In this section
This section contains the following subsections.
Section
5.9.1 Create a method
5.9.2 Perform a run
5.9.3 Monitor the run
5.9.4 After run procedures
ÄKTA avant User Manual 29035184 AE

5.9 Create a method and perform a run

5 Operation
See page
226
230
233
236
225