2. PROFINET NETWORK MODULE (ABCC-M40-PIR)
2.4 Ethernet cable connection
When the RJ45 PROFINET communication ports (port 1 and port 2) are not used, leave these ports open.
Controller
POINT
Use a twisted pair cable (double shielded) compliant with Ethernet Category 5e
(100BASE-TX) or higher as an Ethernet cable. The maximum cable length
between nodes is 100 m.
The first axis
servo amplifier
Ethernet cable
The second axis
servo amplifier
Port 2
Ethernet cable
Port 1
2 - 3
The final axis
servo amplifierr
Port 2
Ethernet cable
Port 1
Port 2
Port 1