Moneris HiSpeed 6200 Operating Manual page 150

6 The Ernex Programs
140 Moneris HiSpeed 6200 Operating Manual
DISABLE ERNEX
PAYMENT APPL
ROUTING CODE
COMMUNICATION
To access the Ernex SETUP menu, from the
1. Press the ADMIN key.
The MAIN MENU appears.
2. Scroll down to ERNEX and press OK.
The ERNEX menu appears.
3. Scroll down to SETUP and press OK.
The SETUP menu appears.
(Default = YES)
The ENABLE ERNEX? prompt appears.
To allow the terminal to process Ernex card
transactions, press F1.
The SETUP menu reappears.
Stops the terminal from processing Ernex transactions.
(Default = YES)
The DISABLE ERNEX? prompt appears.
To stop the terminal from processing Ernex card
transactions, press F1.
The SETUP menu reappears.
Allows the terminal to process debit and credit card
transactions.
The PAYMENT APPL ENABLED? prompt appears.
To allow the terminal to process debit and credit card
transactions, press F1.
The SETUP menu reappears.
Directs the Ernex transactions within the Ernex Host.
The ENTER ERNEX ROUTING CODE entry screen
appears.
To accept the default code, press OK.
To change the default code, key in the 2-digit routing
code provided by Moneris, and press OK.
The SETUP menu reappears.
Tests the communication link between the terminal and the
Ernex Host
The terminal begins to communicate with the Ernex
Host to test the connection.
If the test is successful, the COMMUNICATION
WITH ERNEX OK message appears.
Press OK to return to the ERNEX menu.
READY screen: