Ernex Procedures; Reprinting Ernex Receipts - Moneris HiSpeed 6200 Operating Manual

Most Ernex Loyalty Card transactions are started
transaction, however they can also be started through the Ernex menus.
Note: You must have the original Ernex Loyalty Card Purchase receipt available in order to
perform this transaction.
From the READY screen:
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to ERNEX, and press OK.
The ERNEX menu appears.
3. Scroll down to REFUND, and press OK.
The SWIPE OR ENTER CARD prompt appears.
4. Swipe the Loyalty Card on the terminal
OR Key in the Loyalty Card number, and press OK.
The ENTER TOTAL AMOUNT entry screen appears.
5. Key in the total amount of the Purchase including taxes, and press OK.
The ERNEX REFERENCE NUMBER entry screen appears.
6. Key in the REF # that appears on the Ernex Loyalty Card Purchase receipt, and press OK.
The PROCESSING prompt appears then
the APPROVED message appears while the first receipt prints.
7. Press OK to return to print the next receipt.
8. Press OK to return to the ERNEX menu.
9. Press Can/Ann to return to the READY screen.

6.7 Ernex Procedures

6.7.1

Reprinting Ernex Receipts

Use this function to print a duplicate cardholder or Merchant copy of the most recently printed
Ernex receipt.
From the READY screen:
If the ENTER CLERK ID
procedure.
If the ENTER INVOICE NO
Number" procedure.
If the ENTER INFO entry screen appears, refer to the "Entering Optional Information"
procedure.
If the ENTER BENEFIT AMOUNT
Benefit Amount" procedure.
6
automatically at the end of a debit or credit
entry screen appears, refer to the "Entering the Clerk ID"
entry screen appears, refer to the "Entering the Invoice
entry screen appears, refer to the "Entering the
Moneris HiSpeed 6200 Operating Manual
The Ernex Programs
133