Starting An Ernex Loyalty Card Transaction From A Financial Transaction - Moneris HiSpeed 6200 Operating Manual

6 The Ernex Programs
6.7.2 Starting an Ernex Loyalty Card Transaction from a Financial
Transaction
134 Moneris HiSpeed 6200 Operating Manual
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to ERNEX, and press OK.
The ERNEX menu appears.
3. Scroll down to REPRINT, and press OK.
The REPRINT menu appears.
To print a duplicate of the:
- Merchant Copy of the Ernex receipt, press F1 to select MERCHANT.
- Cardholder Copy of the Ernex receipt, press F3 to select CUSTOMER.
The PRINTING message appears while a duplicate of the most recently printed receipt is
printed.
4. The terminal returns to the ERNEX menu.
5. Press Can/Ann to return to the READY screen.
The Ernex Loyalty application can be started automatically at the end of a financial
transaction as well as through the Ernex
When the UPDATE POINTS TO ANOTHER CARD? prompt appears:
a. To complete the financial transaction without starting a Loyalty card transaction,
press F3 to select NO.
IMPORTANT: If this prompt appears at the end of a Pre-Auth Advice for a
Voice Authorized
The terminal returns to the READY screen.
OR
To start a Loyalty transaction using an Ernex Loyalty Card,
press F1 to select YES.
The SWIPE OR ENTER CARD prompt appears.
b. If the financial card was swiped, swipe the Loyalty Card.
If the financial Card number was keyed in (e.g. for a
Loyalty Card number, and press OK.
Go to the appropriate Ernex Loyalty transaction and continue from the SWIPE OR ENTER
CARD prompt.
If you completed a financial:
Purchase
Refund
Purchase-Void
Refund-Void
Pre-Auth
Pre-Auth Advice
menus.
transaction, you MUST select NO.
this Loyalty transaction will
begin:
Purchase (step 4)
Refund (step 4)
Ernex Void (step 4)
Ernex Void (step 4)
Ernex Pre-Auth
Ernex Pre-Auth Advice
MOTO transaction), key in the