The Ernex Setup Menu - Moneris HiSpeed 6200 Operating Manual

CARD INQUIRY
VOID
REPRINT
REPORT FUNCS
SETUP
To access the ERNEX menu, from the READY screen:
6.8.2

The Ernex SETUP Menu

The Ernex Configuration menu (see SETUP below) contains a list of parameters that can be
enabled and configured on the HiSpeed 6200 terminal.
IMPORTANT: The Ernex program requires an additional agreement between the
merchant and Moneris Solutions. Please ensure that the necessary agreements are in
place before attempting to configure those programs on the terminal.
The parameters are listed in the order they appear on the menu. Some items may not appear
on the terminal until another feature is enabled.
INITIALIZATION
GENERAL PARAMS
PRINTER CONFIG
ENABLE ERNEX
Starts an
Starts an
Starts the
Opens the
Opens the
1. Press the ADMIN key.
The MAIN MENU appears.
2. Scroll down to ERNEX and press OK.
The ERNEX menu appears.
SETUP
Initializes the terminal to the Ernex Host
Sets the format of the date printed on Ernex receipts.
Sets up the Ernex voucher messages printed on the Ernex
receipts.
Allows the terminal to process Ernex card transactions.
6
Ernex Card Balance Inquiry
Ernex Void
Ernex Reprint function
Ernex REPORT FUNCTIONS
Ernex SETUP menu
Press OK to select DATE FORMAT.
The DATE FORMAT menu appears.
Select the date format, and press OK.
The GENERAL PARAMETERS menu reappears.
Press Can/Ann to return to the Ernex SETUP menu.
Press Can/Ann to return to the ERNEX menu.
Press OK to select VOUCHER HEADER.
The VOUCHER HEADER menu
Moneris HiSpeed 6200 Operating Manual
The Ernex Programs
menu
appears.
139