Ernex Close Batch - Moneris HiSpeed 6200 Operating Manual

6 The Ernex Programs
6.9.3

Ernex Close Batch

144 Moneris HiSpeed 6200 Operating Manual
Purchase
Refund
Redemption
Activation
Gift Transactions
Purchase
Refund
Activation/Load
From the READY screen:
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to ERNEX, and press OK.
The ERNEX menu appears.
3. Scroll down to VOID, and press OK.
If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.
The SWIPE OR ENTER CARD prompt appears.
4. Swipe the Ernex card on the terminal
OR Key in the Ernex Card number, and press OK.
If the ENTER CVC entry screen appears, key in the Card Validation Code (CVC), and
press OK.
Note: The CVC is found on the back of the Ernex card after the Card number.
It may be located under a scratch-off panel. If the ENTER CVC prompt
appears, this code must be keyed in to ensure that the Ernex card is authentic.
If the ENTER CLERK ID
procedure.
If the ENTER INVOICE NO
Number" procedure.
The ERNEX REFERENCE NUMBER entry screen appears.
5. Key in the REF # that appears on the Ernex card transaction receipt, and press OK.
The PROCESSING prompt appears, and then the APPROVED PRESS OK prompt appears.
6. Press OK to return to the READY screen.
From the READY screen:
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to ERNEX, and press OK.
The ERNEX menu appears.
3. Scroll down to REPORT FUNCS, and press OK.
The REPORT FUNCS menu appears.
4. Press OK to select CLOSE BATCH.
If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.
entry screen appears, refer to the "Entering the Clerk ID"
entry screen appears, refer to the "Entering the Invoice