Reset The Trailer Message To The Original Text - Moneris HiSpeed 6200 Operating Manual

1. Scroll down to the line number and language you wish to edit
(e.g. LINE 3 ENGLISH).
2. Press the CORR key. (This deletes the entire line.)
Note: A single message line can be from zero to 24 characters (if no double width is used) or
from zero to 12 characters (if double width is used). All characters are allowed.
3. Key in the new text. (Refer to
Note: Once you have keyed in new text, you can use the Corr key to delete characters one at
a time.
4. Press OK to save the new line of text.
C. Format the font of the entire trailer message:
1. Scroll down to the format you wish to apply to all lines of the message (BOLD, DOUBLE
HEIGHT or DOUBLE WIDTH) and press the OK key.
2. Press F1 to apply the format.
D. Press the Can/Ann key four times to return to the READY screen.
4.2.3

Reset the trailer message to the original text

If you have edited a trailer message, you can reset the message to the
IMPORTANT: If you edit or change an English trailer message, ensure that you also
edit the corresponding French message. The trailer message that prints on the
cardholder receipt is determined by the language on the card's magnetic stripe.
For example: If you reset Option 1 to the original English text, make sure to reset the
French Option 1 message as well.
From the READY screen:
1. Press the Admin key.
2. Scroll down to CONFIGURATION, and press OK.
The CONFIG FUNCS menu appears.
3. Scroll down to PRINTER CONFIG, and press OK.
The PRINTER CFG menu appears.
4. Scroll down to TRAILER MSG, and press OK.
The ACTIVE TRAILER MSG menu appears.
5. Select the trailer message option you wish to reset to the
6. Press the Can/Ann key four times to return to the READY screen.
If the SWIPE ADMIN CARD prompt appears, swipe the
a. Scroll down to the trailer message option, and press OK.
b. Scroll down and select INITIAL TEXT (i.e., press OK).
The RESET MSG TO ITS INITIAL TEXT? prompt appears.
c. Press F1 (YES) to confirm that you wish to reset the trailer message to the
text.
The ACTIVE TRAILER MSG menu re-appears.
4 Configuring Your Terminal
"Entering alphabetic characters and
Moneris HiSpeed 6200 Operating Manual
punctuation").
original text.
POS Admin card.
original text:
original
79