1
Introduction
1.4.1
Caring for the Terminal
2
Moneris HiSpeed 6200 Operating Manual
•
Clean the magnetic stripe reader (MSR) periodically, using the cleaning card
provided with your terminal. To obtain additional MSR cleaning cards,
Moneris Merchant Service
Note: Do NOT use the MSR cleaning card in the chip card reader.
•
It is recommended that merchants obtain their POS stationery and paper rolls from
Moneris to ensure that these supplies comply with the applicable specifications.
Contact the Moneris Merchant Service Centre
terminal.
•
Load the paper
into the printer correctly.
IMPORTANT: You must use the exact power adaptor and cable provided with the
terminal by Moneris Solutions. Failure to do so may affect the operability of, or cause
damage to the terminal and Moneris Solutions shall have no liability whatsoever for a
failure to follow these instructions.
•
Avoid unnecessary movement of the terminal base to prevent accidental
disconnection of any of the cables.
Centre.
to obtain additional supplies for your
contact the
Need help?
Do you have a question about the HiSpeed 6200 and is the answer not in the manual?