Moneris HiSpeed 6200 Operating Manual page 119

5.5.5.3 Pre-Authorization
Note:
- If a chip card is used, the cardholder may be prompted to enter a PIN.
- If a
- Some debit chip cards may be used for this transaction.
From the
1. Press the Admin key.
The MAIN MENU appears.
2. Press OK to select TRANSACTIONS.
The TRANSACTIONS menu appears.
3. Scroll down to PRE-AUTH., and press OK.
The ENTER AMOUNT entry screen appears.
4. Key in the amount of the Pre-Auth, and press OK.
The SWIPE OR INSERT CARD prompt appears.
5. Choose a Card Entry method as indicated in the table below, and follow the appropriate
instructions:
- Complete the transaction by using the Pre-Auth's
- Delete the transaction by performing a
Private label credit card is used, you may be prompted to enter a Promo code.
READY screen:
If the ENTER CLERK ID
procedure.
If the ENTER INVOICE NO
Number" procedure.
If an external PINpad is attached, the SWIPE CARD prompt appears on the terminal
and the SWIPE OR INSERT CARD prompt appears on the external PINpad.
If a contactless reader is attached, it continues to display the WELCOME/BONJOUR
screen because contactless Pre-Auths are not permitted.
5 Financial Transactions
Original Sequence
Transaction
entry screen appears, refer to the "Entering the Clerk ID"
entry screen appears, refer to the "Entering the Invoice
Moneris HiSpeed 6200 Operating Manual
number.
Inquiry.
109