Re-Initialization; Restore Factory Defaults; Remote Code Download - Moneris HiSpeed 6200 Operating Manual

4.10.2 Re-initialization

The Moneris Merchant Service Centre may ask you to re-initialize your terminal from time to
time.
From the READY screen:
1. Press the Admin key.
The MAIN MENU appears.
2. Scroll down to CONFIGURATION, and press OK.
The CONFIG FUNCS menu appears.
3. Press OK to select INITIALIZATION.
The RETAIN CURRENT MERCH SETTINGS? prompt appears.
4. Press F1 to select YES.
IMPORTANT: Do NOT select NO unless instructed to do so by a Moneris Service
Centre representative.
5. Please wait while the terminal communicates with the Moneris Host. This may take a few
minutes.
The external PINpad displays WELCOME/BONJOUR during the Re-initialization.
The CLEAR TERMINAL STORAGE? prompt appears.
6. Press F3 to select NO.
IMPORTANT: Do NOT select YES unless instructed to do so by a Moneris Service
Centre representative. Selecting YES will erase all the transaction information from the
terminal memory.
The

4.11 Restore Factory Defaults

IMPORTANT: Do NOT use this function unless directed to do so by the Moneris
Merchant Service Centre.
This function returns the terminal's parameters to the original factory settings.

4.12 Remote Code Download

IMPORTANT: Do NOT use this function unless directed to do so by the Moneris
Merchant Service Centre.
If the SWIPE ADMIN CARD prompt appears instead, swipe the POS Admin card.
PLEASE LOGON prompt appears.
4 Configuring Your Terminal
Moneris HiSpeed 6200 Operating Manual 95