Ip Address Configuration Example - H3C S9500 Series Operation Manual

Operation Manual – IP Address
H3C S9500 Series Routing Switches
Caution:
The MAC address auto filling function is enabled only after the IP address protection
function is enabled on the interface.
Once an auto-fill ARP entry is filled with a MAC address, the entry becomes a
normal static ARP entry and cannot be filled again.
1.3 Displaying and Maintaining IP Addresses
Display all hosts on the
network and the
corresponding IP addresses
Display the configuration of a
port or all ports

1.4 IP Address Configuration Example

I. Network requirements
Configure the IP address as 129.2.2.1 and subnet mask as 255.255.255.0 for the
VLAN interface 1 of the switch.
II. Network diagram
Console cable
PC
Figure 1-3 Network diagram for IP address configuration
III. Configuration procedure
# Enter VLAN interface 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface vlan-interface 1
# Configure an IP address for VLAN interface 1.
To do...
Switch
Chapter 1 IP Address Configuration
Use the command...
display ip host
display ip interface [ brief ]
[ interface-type interface-number ]
1-7
Remarks
Available in
any view