Installing The Oil Filter Bracket - Yamaha F200B Service Manual

POWR
3. Install the oil pump assembly 3 by align-
ing the oil pump gear with the crankshaft.
NOTICE: Before installing the oil
pump assembly, make sure to fill it
with engine oil through the oil pas-
sages a.
a
3

Installing the oil filter bracket

Do not reuse a gasket or O-ring, always
replace it with a new one.
1. Install a new gasket 1 and the oil filter
bracket 2, and then tighten the oil filter
bracket bolts 3 in the order 1, 2, and
so on.
2. Install the oil filter union bolt 4, and then
tighten it to the specified torque.
3. Install a new O-ring 5 and the oil pres-
sure sensor 6, and then tighten the oil
pressure sensor 6 to the specified
torque.
7-79
Power unit
a
3
3
5
6 4
STBD
1
4
3
Oil filter union bolt 4:
34 N·m (3.4 kgf·m, 25.1 ft·lb)
Oil pressure sensor 6:
18 N·m (1.8 kgf·m, 13.3 ft·lb)
4. Add a small amount of engine oil through
the oil passage a of the oil filter bracket.
1
2
UP PORT
5
2
3
a