TECH
FEA
Electronic control system
These models use electronic fuel injection control, digital ignition control, VCT control, knock con-
trol, over-rev control, alert control, ETV control, and fail-safe control. The engine ECM performs
these controls according to the signals sent from various sensors and switches.
In addition, the engine ECM has a self-diagnosis function to perform troubleshooting using the
YDIS.
The 6Y8 Multifunction Meter can be installed as an option.
Air (cowl inside)
Air (cowl outside)
High-pressure
fuel pump
Vapor separator
OCV
Ignition
coil
Ignition
coil
6Y8 Multi-
function
Meter
2-1
Technical features and description
Check valve
Check valve
Filter
Check valve
Fuel injector
OCV
Fuel injector
Throttle control
Valve control
Fuel control
Ignition control
Battery
Low-pressure fuel pump
Water separator
Cam position sensor
Pulser coil
Air pressure sensor
Oil pressure sensor
Engine temperature sensor
Air temperature sensor
Engine
Knock sensor
ECM
APS
Shift cut switch
Neutral switch
Thermoswitch
Engine shut-off switch
Water pressure sensor (optional)
Speed sensor (optional)
Canister
Fuel
Water
detection
switch
Vapor shut-off
valve
Air
ETV
TPS