Yamaha F200B Service Manual page 300

POWR
TIP:
• When turning the timing belt tensioner,
apply a force of 15 N·m (1.5 kgf·m, 11.1
ft·lb) or less.
• Make sure that the belt position marks are
aligned with the " " marks. See steps 6
and 7 in "Removing the timing belt" (7-38).
8. Install the timing belt guides 0.
0
9. Turn the crankshaft clockwise 2 full turns
until the marks p and r are aligned,
and then check that the marks s and t
on the VCT assemblies and driven
sprockets are aligned.
s
r
p
10. Adjust the timing belt guide clearance u.
7-41
Power unit
0
t
u
Timing belt guide clearance u:
0.5–1.5 mm (0.02–0.06 in)
11. Install the wiring harness guide. See
steps 13–37 in "Installing the wiring har-
ness" (7-23).
12. Install the fuel hoses and fuel rail covers.
See steps 7 and 9 in "Installing the fuel
injector" (6-46).
13. Connect the quick connectors. See "Con-
necting the quick connector" (6-8).
14. Install the intake manifold (PORT). See
"Installing the intake manifold" (6-18).
15. Install the intake silencer, and then con-
nect the air temperature sensor coupler
and blowby hose. See "Installing the
intake silencer" (6-19).
u