Yamaha F200B Service Manual page 546

Hide thumbs Also See for F200B:

Table of Contents

Checking the engine oil level

1. Place the outboard motor in an upright

position. NOTICE: If the outboard

motor is not level, the oil level indi-

cated on the dipstick may not be cor-

2. Start the engine and warm it up for 5–10

3. Stop the engine and leave it off for 5–10

4. Remove the top cowling.

5. Remove the dipstick 1 and wipe it clean.

6. Insert the dipstick 1 completely for a

correct measurement and remove it

7. Check that the oil level indicated on the

dipstick 1 is between the upper mark a

and the lower mark b. If the engine oil is

not at the proper level, add or extract

Checking the engine start switch and

engine shut-off switch

1. Check that the engine starts when the

engine start switch is turned to START.

2. Check that the engine stops when the

engine start switch is turned to OFF.

È 703 remote control model

É 704 remote control model

3. Check that the engine stops when the

clip is removed from the engine shut-off

Chapters

Table of Contents

Fl200b F250g Fl250g