Removing the engine ECM
1. Remove the engine ECM 1.
2. Remove the knock sensor lead a from
the holder 2.
1
a
Installing the engine ECM
1. Fasten the knock sensor lead a using
the holder 1.
2. Install the engine ECM 2, and then
tighten the engine ECM bolts 3 to the
specified torque.
2
3
a
3
Engine ECM bolt 3:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
2
1
Engine ECM
7
7-36