Yamaha F200B Service Manual page 390

LOWR
2
1
TIP:
Do not reuse a shim if deformed or
scratched.
3. While holding the special service tool 3,
strike it to check that the taper roller
bearing outer race is installed properly.
3
4
Driver rod LL 3: 90890-06605
Bearing inner race attachment 4:
90890-06658
4. Install a new needle bearing 5.
8-27
Lower unit
3
4
5
7
6
Ball bearing attachment 6:
90890-06655
Bearing outer race puller assembly 7:
90890-06523
TIP:
The needle bearing contains 24 rollers.
Assembling the forward gear
Do not reuse a bearing, always replace it
with a new one.
1. Install a new taper roller bearing.
Bearing inner race attachment 1:
90890-06659
Assembling the oil seal housing
Do not reuse a bearing or oil seal, always
replace it with a new one.
1. Install a new needle bearing to the speci-
fied depth a.
2
1
Needle bearing attachment 1:
90890-06610
Driver rod L3 2: 90890-06652
1
a