Removing The Cylinder Head; Disassembling The Cylinder Head - Yamaha F200B Service Manual

POWR

Removing the cylinder head

1. Remove the fuel rails. See "Removing
the fuel injector" (6-45).
2. Remove the engine hangers 1.
3. Remove the OCVs 2 and filters 3.
4. Loosen the cylinder head bolts 4, 5,
and 6 in the order 1, 2, and so on, and
then remove the cylinder heads 7 and
gaskets 8. NOTICE: Be careful not to
scratch or damage the mating sur-
faces of the cylinder head and cylin-
der block.
PORT
6
7 6
(T55)
A 0
8 9
4 5
3
2
4
1
7-61
Power unit
1
3
2
UP STBD
6 7
0 A
9 8
5
5 4
3
2 1 4
8

Disassembling the cylinder head

1. Remove the anode assemblies 1.
6
1
2. Remove the intake and exhaust valves
using the special service tools 2 and 3.
6
4
2
3
5
7