Ricoh MD-P2 Field Service Manual page 281

5816 013 RFU Timing
5816 021 Function Flag
5816 022 Install Status
Connect Mode (N/M)
This SP displays and selects the RCG-N connection method.
5816 023
0: Internet connection
1: Dial-up connection
NotiTime ExpTime
5816 061
Proximity of the expiration of the certification.
HTTP Proxy use
5816 062
This SP setting determines if the proxy server is used when the machine communicates
with the service center.
HTTP Proxy Host
This SP sets the address of the proxy server used for communication between Cumin-N
and the gateway. Use this SP to set up or display the customer proxy server address. The
address is necessary to set up Cumin-N.
5816 063
• The address display is limited to 127 characters. Characters beyond the 127th
character are ignored.
• This address is customer information and is not printed in the SMC report.
Selects the timing for the remote firmware
updating.
[0 or 1 / 1 / – ]
*CTL
0: Any status of a target machine
1: Sleep or panel off mode only
[0 or 1 / 0 / -]
*CTL
0: Not registered, 1: Registered
This SP displays the RCG-N installation status.
0: RCG-N not registered
*CTL
1: RCG-N registered
2: Device registered
*CTL
*CTL
*CTL
*CTL
Engine SP5-xxx
3
49