Ricoh MD-P2 Field Service Manual page 37

9. Take out the harnesses [G] (
10. Pull out the harnesses from the rear side.
11. Remove the laser optics housing unit.
After replacing the laser optics housing unit
1. Turn on the machine.
2. Execute "LPos. Adj:Rough" with SP2-120-001, and then execute "LPos. Adj:Fine" with
SP2-120-002.
3. Adjust the registration settings for each tray and for the front and rear sides of the paper with
SP1-001 and SP1-002 if necessary.
x 1).
Laser Optics
4
35