Ricoh MD-P2 Field Service Manual page 206

6. Troubleshooting
Hardware/System
-90
A forced system reset (WDOG) occurred.
819
Fatal kernel error
D
Due to a control error, a RAM overflow occurred during system processing.
HAIC-P2 decompression error
Error occurred in the compression/decompression module of ASIC in HAIC-P2.
0x5032
• HDD defective
• System memory defective
• Controller board defective
HDD Defective
6
There is no response from HDD. The power supply to the HDD may have been
0x6261
interrupted suddenly.
• Re-format HDD.
• Replace HDD.
USB loader defect
554C
USB loader is detected as defective.
820
Self-diagnostic error
D
0612 Self-diagnostic Error: CPU: ASIC Interrupt Error
• System program defective
• Controller board defective
• Optional board defective
• Controller firmware defective
833
Self-diagnostic error: Engine I/F ASIC
D
0F30 Device ID for ASIC can not be detected. Register error for ASIC.
204