Ricoh MD-P2 Field Service Manual page 145

5860 008 POP to SMTP Wait
5860 009 Mail Receive Pro
5860 013 POP3/IMAP4 Auth.
5860 014 POP3 Srvr Port No.
5860 015 IMAP4 Srv Port
5860 016 SMTP Rx Port No
5860 017 Mail Rx Interval
5860 019 Mail Keep Setting
5860 020 ParMail Rec TOut
5860 021 MDN Res RFC2298
Adjusts the waiting time to access the SMTP server
after the authentication on the POP server.
*CTL
[0 to 10000 / 300 / 1 ms/step]
Sets the protocol of receiving e-mail.
*CTL [1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
Encrypts or does not encrypt passwords for
POP3/IMAP4 authentications.
*CTL
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Adjusts the port number of the POP server.
*CTL
[1 to 65535 / 110 / 1/step]
Adjusts the port number of the IMAP4 server.
*CTL
[1 to 65535 / 143 / 1/step]
Adjusts the port number of the SMTP server.
*CTL
[1 to 65535 / 25 / 1/step]
Adjusts the interval of receiving an e-mail.
*CTL
[2 to 1440 / 3 / 1 minute/step]
Sets the way of keeping the e-mail in the server.
[0 to 2 / 0 / 1/step]
*CTL 0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
Adjusts the time for keeping the partial e-mails. If
the partial e-mails are not received during the set
*CTL
time, these are deleted.
[1 to 168 / 72 / 1 h/step]
Determines whether RFC2298compliance is
switched on for MDN reply mail.
*CTL
[0 or 1 / 1 / -]
0: No, 1: Yes
Main SP Tables: 1
5
143