Table of Contents
Advertisement
Key Acquisition
0
Key can be acquired.
• Replace the controller board.
HDD Key Setting Error
The key is acquired but the HDD can not be set.
1
• Turn the machine power off/on several times.
• Replace the controller board.
NVRAM Read Error
2
NVRAM data conversion fails (mismatch with nvram.conf).
• Replace the NVRAM.
NVRAM Before Replace Error
An error which may be recovered after recycling the power occurs before replacing
NVRAM.
30
Turn the machine power off/on several times.
Replace the controller board.
31 Other Error
An unexpected error occurs while data is being converted. This error is the same as
SC991. See SC991 below.
859
Data Encryption Error 2
B
These are errors of the HDD Data Encryption Option.
HDD Check Error
Data conversion is attempted with no HDD unit present.
8
• Confirm that HDD unit installed correctly.
• Initialize HDD with SP5832-1.
Note: After installation, a new HDD should be formatted with SP5832-1.
SC Conditions
6
207
Advertisement
Table of Contents
