Ricoh MD-P2 Field Service Manual page 116

5. System Maintenance Reference
[User Auth]
5420
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
041 Printer
051 SDK1
061 SDK2
071 SDK3
5
[Auth. Error Code]
5481
This SP codes determines how the authentication failures are displayed.
001 System Log Disp
5501 [PM Alarm Interval] PM Alarm Interval
5501 001 Printout
5504 [Jam Alarm]
114
Determines whether certification is required
before a user can use the printer applications.
*CTL
[0 or 1 / 0 / -]
0: On, 1: Off
[0 or 1 / 0 / 1] 0: ON. 1: OFF
*CTL
Determines whether certification is required
before a user can use the SDK application.
Determines whether an error code appears in the
system log after a user authentication failure
occurs.
*CTL
[0 or 1/ 0 /1]
0: Off, 1: On
Sets the PM alarm Interval.
[0 to 9999 / 0 / 1k prints/step]
The alert is sent to the e-mail address that is
specified for the system administrator using a
*CTL browser and the built-in web server (Web Image
Monitor).
0: Disables the PM alarm
When SP5-866-001 is set to "1", this SP is
enabled.