Ricoh MD-P2 Field Service Manual page 217

• Software defective, re-boot*
1
* : For more information about SC990 and SC991:
1. Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent
logged errors.
2. If you press [0] on the operation panel with the SP selection menu displayed, you will see detailed
information about the recently logged SC990 or SC991 errors, including the software file name,
line number, and so on. (1) above is the recommended method, because another SC could write
over the information for the previous SC.
992
Erratic SC error
D
There was an unusual operation by the software because of:
• An incorrect argument in the program.
• An incorrect internal parameter.
• Work memory not sufficient.
• An error occurred that could not be detected by other SC codes.
• Turn the main power switch off/on.
• Go into the SP mode. Do SP7901 to display details about SC992 (software file name,
line number, and variable), and inform your supervisor of the results.
997
Cannot select application function
B
An application did not start after the user pushed the correct key on the operation panel.
• Software bug
• A RAM or DIMM option required for the application is not installed or not installed
correctly.
998
Application cannot start
D
Register processing does not operate for an application within 60 s after the machine power
is turned on. No applications start correctly, and all end abnormally.
1
SC Conditions
CTL
6
CTL
CTL
215