Ricoh MD-P2 Field Service Manual page 255

Engine SP1-xxx
SP1-XXX (Feed)
[Lead Edge Reg.] Leading Edge Registration
1001 (Tray or By-pass, Paper Type, Process Speed)
Process Speed: LowSpd: Low Speed, HlfSpd: Half speed, NorSpd: Normal speed
• Adjusts the leading edge registration. This SP changes the registration clutch
operation timing for each mode.
• A +ve value sets the registration start timing earlier.
• A –ve value sets the registration start timing later. The value of the normal paper in
RS is the standard value. The values of papers other than normal are added to the
value of the normal paper in RS.
002 T1:NorSpd 0.3mm
003 T1:HlfSpd 0.3mm
006 T2:NorSpd 0.3mm
007 T2:HlfSpd 0.3mm
014 ByPas:NorSpd 0.3mm
015 ByPas:HlfSpd 0.3mm
018 Dup:NorSpd 0.3mm
021 Dup:HlfSpd 0.3mm
063 T1:LowSpd 0.3mm
065 ByPas:LowSpd 0.3mm
066 Dup:LowSpd 0.3mm
100 Mar.pos 0:OFF1:ON
1002 [S-to-S Reg.] Side-to-Side Registration
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [-9.0 to 9.0 / 0 / 0.3 mm/step]
*EGB [0 or 1 / 0 / -/step]
Engine SP1-xxx
3
23