Ricoh MD-P2 Field Service Manual page 273

Detail Option
5411 006
Determines whether guest certification is done.
5413 [Lockout Setting]
001 Lockout On/Off
002 Lockout Threshold
003 Cancel On/Off
004 Cancel Time
5414 [Access Mitigation]
001 Mitigation On/Off
002 Mitigation Time
Bit 0 Guest Certification
*CTL
0: OFF (default), 1: ON
Switches on/off the lock on the local address book
account.
*CTL
[0 or 1 / 0 / -]
0: Off, 1: On
Sets a limit on the frequency of lockouts for account
lockouts.
*CTL
[1 to 10 / 5 / 1/step]
Determines whether the system waits the prescribed
time for input of a correct user ID and password
after an account lockout has occurred.
[0 or 1 / 0 / -]
*CTL
0: Off (no wait time, lockout not cancelled)
1: On (system waits, cancels lockout if correct user
ID and password are entered.
Determines the length of time that the system waits
for correct input of the user ID and password after
a lockout has occurred. This setting is used only if
*CTL
SP5413-3 is set to "1" (on).
[1 to 999 / 60 / 1 min./step]
Switches on/off masking of continuously used IDs
and passwords that are identical.
*CTL
[0 or 1 / 0 / -]
0: Off, 1: On
Sets the length of time for excluding continuous
access for identical user IDs and passwords.
*CTL
[0 to 60 / 15 / 1 min./step]
Engine SP5-xxx
3
41