Ricoh MD-P2 Field Service Manual page 121

5812 002 Facsimile
5816 [NRS Function] These settings are used for NRS.
5816 001 I/F Setting
5816 002 CE Call
5816 003 Function Flag
5816 007 SSL Disable
5816 008 RCG Connect T/O
5816 009 RCG Write Timeout
5816 010 RCG Read Timeout
5816 011 Port 80
Sets the fax or telephone number for a service
representative. This number is printed on the
Counter List, which can be printed with the user's
*CTL "Counter" menu if the Meter Charge mode is
selected with SP5-930-1. This can be up to 19
characters (both numbers and alphabetic
characters can be input).
[0 to 2 / 2 / 1/step] Alphanumeric
*CTL 0: Off, 1: CSS (Not used)
2: Network (The remote service function is on.)
[0 or 1 / 1 / 1/step]
*CTL
0: Start, 1: End
[0 or 1 / 0 / 1/step]
*CTL 0: Off (The remote service function is disabled.)
1: On (The remote service function is enabled.)
[0 to 1 / 0 / 1/step]
*CTL
0: On, 1: Off
Sets the timeout counter for the remote
connection.
*CTL
[1 to 90 / 30 / 1 second/step]
Sets the timeout counter for writing processing.
*CTL
[0 to 100 / 60 / 1 second/step]
Sets the timeout counter for reading processing.
*CTL
[0 to 100 / 60 / 1 second/step]
Enables or disables access to the SOAP method
via port 80.
*CTL
[0 to 1 / 0 / 1/step]
0: Disables, 1: Enables
Main SP Tables: 1
5
119